A nice benefit of getting your home security installed by trained experts is that you seldom need to worry about it. Even so, there will likely be a few instances where you have to reset your alarms in Oklahoma City. If you’re utilizing the ADT Command hub, your system reset usually needs only a couple tap of a button following occurrences like battery changes, power outages, and false alarms.
Consult Your Instruction Manual Before Resetting Your Alarm
One note of caution before you begin to reset your Oklahoma City home security system, check your manual ahead of time. You don't want to undermine your system because you hit a button in error. In addition, your system might be different if you switched from a numerical keypad to a fully digital system. If there’s ever a time when you can't reset your system, don't be reluctant to call the professionals.
Resetting Your Oklahoma City Home Security System Because Of A False Alarm
Usually, a false alarm occurs due to a sensor that was tripped by accident. You are able to utilize the central hub or open the ADT mobile app and tap the shield icon and type in your security code to turn off the system in these situations. You may receive notification from your monitoring professionals, but just let them know it was a false alarm.
How To Reset Your Alarm After A Power Outage In Oklahoma City
If the power goes out because of lighting, strong winds, or other reasons, you might start to hear a steady beep from your control panel. This signifies that the alarm is being powered by the secondary power source. To reset your unit and stop the beeping, you should take steps to disarm and rearm your security.
Keep in mind, if power is out for prolonged time frame, you might need a total system reset. Pay careful attention to the directions in the manual -- usually by submitting your unique passcode and pressing the off button two times -- and you should be back in business. You could still hear chirps from the backup power, as it may not end until your battery is fully charged. Contact your security technician if you are still having issues with your ADT system 20 hours after the power is resumed.
When You Need To Reset Your Home Security System After Changing A Battery
Occasionally you will have to change a battery in one of your home security components. In order to accomplish this, you should set your alarm system to "Test Mode" so you prevent setting off an accidental alarm. After the you replace the old battery, remove the system from "Test Mode" and restore normal operations. If the system doesn't register the component or the battery light remains on, you might need a full reset of your security system.
Reset Your Oklahoma City Security System After Adding Or Deleting A Code
The addition and deletion of personal codes can be done on your ADT Command interface and the ADT Control mobile app. You should never have to perform a reset of your alarm when deleting or adding users. With that being said, if you relocate to a new property already equipped with an ADT system, you'll want to contact your residential security experts at (405) 347-5898 to start a new contract. The installer will visit your property to replace components, set up other components (if necessary), and perform a full reset.
An Easy-To-Use Security System Is Only A Call Away
Attempting to reset a home security system in Oklahoma City is a challenge if it isn’t equipped with clear instructions and features. If you’re ready to get your functional and powerful alarm system, call (405) 347-5898 or complete the form below. Our team is pleased to customize the ideal security system for your residence.