Where To Place Carbon Monoxide Detectors In Your Oklahoma City Home
Property owners must protect against numerous risks like fire, burglary, and flooding. But what about a danger that can’t be detected by human senses? Carbon monoxide is different from other threats as you may never know it’s there. Despite that, installing CO detectors can simply shield your family and property. Find out more about this potentially lethal gas and where to place carbon monoxide detectors in your Oklahoma City residence.
What Is Carbon Monoxide?
Referred to as the silent killer because of its absence of color, odor, or taste, carbon monoxide is a commonly found gas caused by incomplete fuel combustion. Any fuel-burning appliance like a furnace or fireplace may produce carbon monoxide. Although you usually won’t have any trouble, difficulties can crop up when equipment is not routinely maintained or properly vented. These oversights can cause a build-up of the potentially lethal gas in your home. Heating appliances and generators are the most frequent reasons for CO poisoning.
When exposed to lower amounts of CO, you may experience fatigue, headaches, dizziness nausea, or vomiting. Prolonged exposure to higher concentrations may result in cardiorespiratory arrest, coma, and death.
Tips For Where To Place Oklahoma City Carbon Monoxide Detectors
If you don’t have a carbon monoxide detector in your residence, get one today. Ideally, you should have one on each floor of your home, including basements. Review these suggestions on where to place carbon monoxide detectors in Oklahoma City:
- Place them on each level, particularly in places where you have fuel-burning appliances, including fireplaces, furnaces, water heaters, and gas dryers.
- You should always use one within 10 feet of bedrooms. If you only get one carbon monoxide detector, this is the place for it.
- install them approximately 10 to 20 feet from potential CO producing appliances.
- Avoid affixing them right above or next to fuel-consuming appliances, as a bit of carbon monoxide might be released when they start and trigger a false alarm.
- Secure them to walls at least five feet from the ground so they will sample air where people are breathing it.
- Avoid putting them in dead-air places and beside windows or doors.
- Place one in rooms above attached garages.
Test your CO detectors regularly and maintain them in accordance with manufacturer guidelines. You will usually have to switch them out every five to six years. You should also make certain any fuel-consuming appliances are in in good working shape and adequately vented.